EasyLift Economy Drum Transporters

  • Features
  • Specification
  • Videos

EG1 Single Clamping mechanism grips any size plastic, fiber or steel chimed drum.

Lifts drum 20"/508 mm above floor level at 1/2"/12.7mm per stroke on foot pedal

Pressure sensitative foot pedal lowers drum at controlled rate

Casters 5"x 2" : (2) locking swivel, (2) rigid

Powered Coated in Safety Yellow for durability

Virtually maintenance free operation

12-month warranty, made in USA.

30-DAY FREE TRIAL FOR IN-PLANT EVALUATION

OPTIONAL FEATURES

  • FDA Approved epoxy powder coating
  • SRC Option: EG1 non-sparking stainless steel outer housing and jaws with rubber belt and anti-static grounding strap
  • Air tank pneumatic lift for hazardous areas (includes SRC option)
  • EG2 double clamping mechanism
  • SRC Option: EG2 non-sparking stainless steel outer housing and jaws with rubber belt and anti-static grounding strap
  • Stainless steel construction
  • Increased lift heights
  • 8" wheels for rough surfaces
  • Hand Brakes for traveling down inclined surfaces
  • Scales with or without intrinsically safe indicators
  • Jib for handling drums into containment vessels

WEIGHT CAPACITY: 800 lb/363 kg. WITH MANUAL LIFT (Lifts 0.5" per stroke on the foot pedal)

WEIGHT CAPACITY: 700 LB/317 KG WITH PNEUMATIC LIFT  (Example of the number of lifts produced: With the tank filled at 120 psi this model will lift & lower a 600 lb drum, 8" above the floor, 34 times before needing a recharge.)

Weight: 325 lb/ 147 kg.

Drum Lift Height: 20”/508 mm

Length: 35”/889mm x Width: 39.5”/1,003 mm x Height: 46.25”/1,175 mm

SHIPPING INFORMATION:  375 lbs. Freight Class 125 from zip code 19713 (Options can increase shipping weight)

Mobile Drum Handling Equipment

Standard Model ELE800 has drum weight capacity of 800 lb.

The EasyLift Economy Drum Mover can eliminate strained backs, pinched fingers and other injuries associated with manhandling drums on and off pallets, floor scales and secondary containment pallets. All drum movers will handle any size plastic, fiber or steel chimed drums of any height raising to a full 20 inches. The convenient foot pedal arrangement is user friendly for all operators. The direct lift concept of the hydraulic cylinder to the load being lifted requires minimal foot pounds applied to the lift pedal. The smaller pedal is pressure sensitive to provide a controlled descent when pressure is applied. The 5” x 2” swivel casters are equipped with a lever locks to keep the machine from rolling when not in use. All of our drum handling equipment is designed with the safety of your team in mind.

                   

 The ELE800 drum mover is supplied with an EG1 single clamping mechanism. This clamping mechanism automatically latches on the drum chime when being elevated for transport. The clamping mechanism is fully adjustable for shorter height drums. An optional EG2L double clamping mechanism is recommended for heavy plastic and fiber drums to lower the stress exerted in the drums chime.

All EasyLift drum movers are manufactured in the USA.

The ELE800 is provided with a safety yellow powder coating. Options to this include FDA approved epoxy powder coating or 304 stainless steel construction.

The ELE800 as with all of our products are available with scales for weighing drums. Scales provide instant drum weights without the need for bulky floor scales. Scales are extremely accurate and perfect for inventory or pumping out of drums by weight.

The ELE is available with a rechargeable air tank and pneumatic cylinder  to replace the manual hydraulic foot pump. This pneumatic option provides as effortless way to raise and lower drums. The 200 p.s.i. air tank is equipped with a coupling that allows quick recharging, similar to inflating a tire. The pneumatic cylinder elevates/lowers the drum by means of a joystick control. Typically, if a tank is recharged at 100 p.s.i., a 600 lb drum can be lifted and lowered 10” above floor level 30 times per charge. As this option is generally ordered for use in hazardous areas, it includes a rubber belt to contact the lower side of the drum, non-sparking jaws in the clamping head and grounding strap to eliminate static sparks. If you would like to learn more about our drum moving equipment please contact us today.

 

EasyLift Economy Drum Transporters:
Product Document Download (PDF)