EasyLift Counterbalanced Drum Transporter (CB) with DC Powered Lift

flexible-hero-image
01-EL800CBDC-with-steel-drum-lowered
02-EL800CBDC-with-plastic-drum-lowered
03-EL800CBDC-with-fiber-drum-raised
04-Ergo-CB-DC-with-EG1-on-steel-plastic-and-fiber-drums
05-Top-of-Ergo-CB-DC-Cabinet
01-EL800CBDC-with-steel-drum-lowered
02-EL800CBDC-with-plastic-drum-lowered
03-EL800CBDC-with-fiber-drum-raised
04-Ergo-CB-DC-with-EG1-on-steel-plastic-and-fiber-drums
05-Top-of-Ergo-CB-DC-Cabinet

EasyLift Counterbalance Drum Transporter

with DC Powered Lift

The EasyLift Counterbalance Drum Transporter are designed to eliminate the legs forward of the clamp and compensate for the lack of legs with counterweights, making this model ideal for picking or placing drums in cabinets, under air piston pumps, onto scales, or pallets where side access is necessary. Providing approximately 4.25” (10.8 cm) of reach forward of the front casters with the EG1 Single Clamping Mechanism can safely and easily pick up a steel, poly, or fiber chimed drum. Raising or lowering to a full 20″ (50.8cm) with a DC powered lift are a great solution for high-volume drum handling applications, especially where lifting drums to higher elevations is required. The DC powered lift system, which is powered by two AGM 12-volt batteries, is capable of lifting drums several hundred times between charges. The 12-volt AGM batteries are housed in a closable cabinet with a hydraulic lift motor, internal charger, master disconnect switch, and a gauge-type battery discharge indicator.

Request A Quote
EasyLift-Counterbalanced-Drum-Transporter-with-DC-Powered-Lift-Easy-Lift-Equipment-0-0-screenshot

EasyLift Counterbalanced Drum Transporter with DC Powered Lift – Easy Lift Equipment

video-union
Specifications
Additional Options
Videos
  • Manual propelled counterbalance drum transporter
  • Single stage mast provides 20” (50.8cm) vertical drum lift height
  • DC powered lift with (2) 12-volt AGM deep cycle batteries (24-volt system), hydraulic motor & internal charger housed in a closable cabinet with a master disconnect switch and gauge type battery discharge indicator. (A polarized heavy gauge extension cord rated 12-3 15amp / 125 volt with grounded type B (NEMA 5-15) plug is required).
  • Capacity available from 400 to 800 lbs. (181 to 363 kgs) contingent on total weights used
  • EG1 single clamping mechanism for handling steel, fiber or plastic chimed drums.
  • Darcor® ergonomic non-marking casters 8” x 2”: (2) swivel, (2) rigid
  • Ergonomic step-down foot floor lock
  • Finish: Safety yellow powder coating
  • 1-year warranty
  • Made in USA

EG2L Double Clamping Mechanism for handling a steel, plastic, or fiber chimed drum (minimum 17” diameter) in lieu of EG1 Single Clamping Mechanism (designed for working with an open top drum or plastic/fiber drum over 600 lbs.) Providing approximately 3.25” (8.3 cm) of reach forward of the front casters.

01-Ergo-CB-DC-w-EG2L-Clamp-on-steel-plastic-and-fiber-drums

EG1 Single clamping mechanism with spark resistant clamp for handling a steel or plastic chimed drum in lieu of EG1 (all metal surfaces including clamping jaws which contact the drum to be stainless steel, includes anti-static grounding strap and a rubber belt attached to drum cradle)

01-EL800CBSRC-with-EG1SRC-on-steel-plastic-and-fiber-drums

EG2L Double clamping mechanism with spark resistant clamp for handling a steel, plastic, or fiber chimed drum (minimum 17” diameter) in lieu of EG1 (designed for working with an open top drum or plastic/fiber drum, all metal surfaces including clamping jaws which contact the drum to be stainless steel, includes anti-static grounding strap and a rubber belt attached to drum cradle). Providing approximately 3.25” (8.3 cm) of reach forward of the front casters.

03-EG2LDCMSRC-clamping-steel-plastic-and-fiber-drums-1

“FDA” Compliant Metallic Gray Powder Coating with coated lift chains, food grade grease & hydraulic fluid, and EG1 Single clamping mechanism with spark resistant clamp

01-Ergo-CBDC-with-FDA-Compliant-Powder-Coating

Fabricate base frame and mast in 304 Stainless-Steel Construction* (includes food grade grease & hydraulic fluid, stainless cylinder, excludes lift chain & select components). *Stainless-Steel construction is stitch welded, not continuous, and finished by glass bead blasting to provide a #4 brush finish with a gray matte uniform surface. Stainless-Steel units are not wash down safe. Stainless-Steel Construction is not available for trial, return, exchange, or cancellation.

02-Ergo-CBDC-with-Full-304-Stainless-Steel-Construction

Non-Intrinsically Safe Scale System: Doran 7000XL Indicator for checking weight or performing inventory. Includes all wiring, two stainless steel load cells, internal battery & charger, mounting and calibration.

01-Ergo-CBDC-with-Doran-7000XL-Non-Intrinsically-Safe-Scale

DC Cabinet with exchangeable batteries for long run application (includes quick disconnects, two sets of 12-volt AGM batteries and external charger in lieu of internal charger) requires DC powered lift option

01-Exch.-Battery-Option-in-DC-Cabinet-2

DC Cabinet with exchangeable batteries & charging stand for long run applications (includes quick disconnects, two sets of 12-volt AGM batteries, and a wall mounted charging stand with an external charger in lieu of internal charger) requires DC powered lift option

07-Exch.-Battery-DC-Box-and-Shelf

Additional set of exchangeable 12-volt AGM batteries with quick disconnects requires DC powered lift & DC Cabinet with exchangeable batteries option

04-Set-of-Exchangeable-Batteries-2

Counterbalance Drum Transporters offer increased lift heights of 40” (101.6 cm) or 60” (152.4 cm) above floor level for double or triple stacking drums, or the ability to pick and place drums to and from shelves.
(*Max capacity of 600 lbs. (270kg) with increased lift height of 60” (152.4cm), 40” lift has a 74.75” (189.9cm) lowered height, 60” lift has a 92.75” (235.6cm) lowered height)

01-EL80040CBDC-with-steel-drum-raised

tab-slider-left-logo-image

Explore Similar Products

Contact Us

Contact Us for a Free Price Quote

We invite you to contact us to learn more about our drum material handling equipment and to receive a no-obligation price quote. Make Easy Lift Equipment your one-stop source for all your drum handling needs!

Learn more about our drum handling equipment, or contact us to place an order. 

Contact Us Call Us: 302-737-7000
cta-1