flexible-hero-image
01-ED-DC-with-FCR-Clamp
02-ED-DC-with-FCR-Clamp-pouring-steel-drum
03-ED-DC-with-FCR-Clamp-pouring-plastic-drum
04-ED-DC-with-FCR-Clamp-pouring-fiber-drum
05-FCR-Clamp-on-DC-Powered-ED
06-Controls-on-a-DC-Powered-ED-with-CR-Clamp
07-ED-DC-with-FCR-Clamp-pouring-plastic-drum-into-tank
01-ED-DC-with-FCR-Clamp
02-ED-DC-with-FCR-Clamp-pouring-steel-drum
03-ED-DC-with-FCR-Clamp-pouring-plastic-drum
04-ED-DC-with-FCR-Clamp-pouring-fiber-drum
05-FCR-Clamp-on-DC-Powered-ED
06-Controls-on-a-DC-Powered-ED-with-CR-Clamp
07-ED-DC-with-FCR-Clamp-pouring-plastic-drum-into-tank

ED Drum Dumpers

with DC Powered Lift, FCR Clamp, and Rotate

ED Drum Dumpers with DC powered lift, FCR (Forward Clamp Rotator) clamp and rotate (for non-hazardous areas) are designed for handling a drum with a standard capacity of 800 lbs. (362.9 kg) but are also available in configurations designed to handle up to 1,000 lbs. (450 kg). ED models are designed with a straddle leg base frame 34.5″ (87.6cm) wide and 47.2″ (120.0cm) in length based on clamp and weight capacity requirements. Available with either a single- or two-stage mast for lift heights from 48″ to 144″ (122 cm to 366 cm) of vertical lift. The FCR clamp features two 8” (20.3 cm) high clamping jaws, each lined with white SBR rubber to provide a durable yet secure non-marking surface to grip the drum. FCR clamps are designed for handling a steel, plastic, or fiber drum from 20” (50.8 cm) to 24” (61 cm) in diameter, and rotates 180° forward for dispensing.  ED Drum Dumpers feature high quality Darcor® casters, which help decrease the push and pull forces involved with moving heavy drums. An ergonomic step-down foot floor lock is also included for added safety, which locks the equipment into place when it’s not in use.

Request A Quote
Screenshot-2026-04-09-at-10.54.31

ED DC Powered Drum Dumper with FCR Clamp & FDA Powder Coating – Easy Lift Equipment

EasyLift DC Powered Drum Dumpers are available with side or forward rotation, clamp or strap rotators.

video-union


Specifications
Additional Options
Videos
  • Manual propelled unit with DC powered: lift, clamp, and rotation
  • Capacity: 800 lbs. (362.9 kg) 
  • Single- or two-stage mast for lift heights from 48″ to 144″ (122 cm to 366 cm) of lift from floor to bottom of a 34.5” (87.6cm) tall drum in the vertical position
  • DC powered lift, clamp, and rotation with (2) 12-volt AGM deep cycle batteries (24-volt system), hydraulic motor & internal charger housed in a closable cabinet with a master disconnect switch and gauge type battery discharge indicator.  (A polarized heavy gauge extension cord rated 12-3 15amp / 125 volt with grounded type B (NEMA 5-15) plug is required).
  • FCR forward clamp rotator lined with white non-marking rubber to securely grip a plastic, fiber, or steel drum from 20” (50.8cm) to 24” (60.9cm) in diameter.   
  • Forward Clamp Rotator rotates 180° forward for dispensing
  • Switches for lift/lower, clamp/unclamp and rotate forward/backwards function located in the top of DC cabinet
  • Clamp/unclamp with red dead-man switch to prevent accidental dropping of drum
  • Darcor® ergonomic non-marking casters 5” x 2”: (2) swivel, (2) rigid
  • Ergonomic step-down foot floor lock 
  • Finish: Safety orange powder coating
  • Base Dimensions: 47.2″ (120.0cm) length x 34.5″ (87.6cm) width 
  • 1-year warranty
  • Made in USA

Small Drum Adaptor (for 16” (40.6cm) to 20” (50.8cm) diameter drums) The small drum adapter is comprised of two individual curved sections with white SBR rubber vulcanized to the metal curve to provide a durable yet secure non-marking surface to grip the drum. Each curve is slid onto a clamping jaw then locked into place by inserting a stainless-steel retaining pin & circle cotter pin on a lanyard.

01-FCR-Clamp-with-Small-Drum-Adapter

Stainless-Steel Adjustable Foot (Quantity 1 Bolt-on, 3530061) & Stainless-Steel Pony Hold Down (Quantity 1 Bolt-on, 3530062). When handling a heavy plastic, fiber, or tapered drum it may be necessary to add either a pony hold-down or foot support to reduce the risk of slippage from the clamping jaws. The CR clamping jaws have two pre-drilled and tapped locations for easy installation. Both supports are constructed in stainless-steel for cleanliness and durability.

02-FCR-Clamp-with-SS-Pony-and-Foot

Adjustable Clamping Pressure with Pressure Gauge – When handling light fiber or a sensitive drum subject to impressions it may be necessary to lower the hydraulic pressure of the clamping mechanism. Reducing the hydraulic clamping pressure will reduce the force of the clamping mechanism against the drum being gripped.

03-Adjustable-Clamping-Pressure-1

Anti-Drift Motor Brake for suspending an unbalanced load in a rotated position for an extended period of time

04-Anti-Drift-Brake-Motor-for-FCR-Clamp

Counterbalanced base frame in lieu of Straddle leg base frame

05-DC-Powered-ED-with-Counterbalanced-Base

“FDA” Compliant Metallic Gray Powder Coating with coated lift chains, food grade grease & hydraulic fluid

01-DC-Powered-ED-with-FCR-Clamp

Fabricate base frame and mast in 304 Stainless-Steel Construction* (includes food grade grease & hydraulic fluid, stainless cylinder, excludes lift chain & select components). *Stainless-Steel construction is stitch welded, not continuous, and finished by glass bead blasting to provide a #4 brush finish with a gray matte uniform surface. Stainless-Steel units are not wash down safe. Stainless-Steel Construction is not available for trial, return, exchange, or cancellation.

04-Closeup-of-FCR-Clamp-with-Stainless-Steel-Const

Non-Intrinsically Safe Scale System: Rice Lake 680 Indicator for dispensing by weight or performing inventory. Includes swivel scale bracket, all wiring, two stainless steel load cells, hardwired to drum dumper battery, mounting and calibration.

01-DC-Powered-ED-with-FCR-Clamp-and-Rice-Lake-680-Scale

DC Cabinet with exchangeable batteries for long run application (includes quick disconnects, two sets of 12-volt AGM batteries and external charger in lieu of internal charger) requires DC powered lift option

01-Exch.-Battery-Option-in-DC-Cabinet-2

DC Cabinet with exchangeable batteries & charging stand for long run applications (includes quick disconnects, two sets of 12-volt AGM batteries, and a wall mounted charging stand with an external charger in lieu of internal charger) requires DC powered lift option

07-Exch.-Battery-DC-Box-and-Shelf

Additional set of exchangeable 12-volt AGM batteries with quick disconnects requires DC powered lift & DC Cabinet with exchangeable batteries option

04-Set-of-Exchangeable-Batteries-2

tab-slider-left-logo-image

Explore Similar Products

Contact Us

Contact Us for a Free Price Quote

We invite you to contact us to learn more about our drum material handling equipment and to receive a no-obligation price quote. Make Easy Lift Equipment your one-stop source for all your drum handling needs!

Learn more about our drum handling equipment, or contact us to place an order. 

Contact Us Call Us: 302-737-7000
cta-1