ELDR Narrow Aisle Drum Dumpers with DC Powered Lift, RCR 1626-8 Clamp, and Rotate

flexible-hero-image
01-ELDR-with-RCR1626-16-fully-raised-2
02-RCR1626-8-Clamp
03-Controls-on-a-DC-Powered-ELDR-with-RCR-Clamp
01-ELDR-with-RCR1626-16-fully-raised-2
02-RCR1626-8-Clamp
03-Controls-on-a-DC-Powered-ELDR-with-RCR-Clamp

ELDR Narrow Aisle Drum Dumpers

with DC Powered Lift, RCR 1626-8 Clamp, and Rotate

ELDR Narrow Aisle Drum Dumpers with DC powered lift, RCR 1626-8 clamp and rotate (for non-hazardous areas) are designed for handling a drum with capacities up to 500 lbs. (226.8 kgs). ELDR models are designed to work in tight, congested areas. Straddle leg models are 39.2″ (99.6cm) in length and 29.5″ (74.9cm) in overall width. A low-profile base frame permits the clamp to grip a drum, or small container from the floor or a pallet. Single stage masts provide either 41” (104.1cm) or 53” (134.6cm) of vertical lift. The RCR 1626-8 clamp features two 8” (20.3 cm) high clamping jaws, as well as an 8” (20.3 cm) high back pad, each lined with white SBR rubber to provide a durable yet secure non-marking surface to grip the drum. The RCR clamp can handle a steel, plastic, or fiber drum from 16” (40.6 cm) to 26” (66 cm) in diameter, and can rotate 360° either left or right for dispensing. ELDR Drum Dumpers feature high quality Darcor® casters, which help decrease the push and pull forces involved with moving heavy drums. An ergonomic step-down foot floor lock is also included for added safety, which locks the equipment into place when it’s not in use.

Request A Quote
ELDR-DC-Powered-Drum-Dumper-w_-RCR1626-16-Clamp-FDA-Powder-for-use-w_-Drums-Easy-Lift-Equipment-0-11-screenshot-min

ELDR DC Powered Drum Dumper w/ RCR1626-16 Clamp & FDA Powder for use w/ Drums – Easy Lift Equipment

video-union
Specifications
Additional Options
Videos
  • Manual propelled unit with DC powered: lift, clamp, and rotation
  • Capacity: 500 lbs. (225kg)
  • Single stage mast sits 10.5″ (26.7cm) above floor level in lower vertical position and provides either 41” (104.1cm) or 53” (134.6cm) of lift from floor to bottom of a 34.5” (87.6cm) tall drum in the vertical position
  • DC powered lift, clamp, and rotation with (2) 12-volt AGM deep cycle batteries (24-volt system), hydraulic motor & internal charger housed in a closable cabinet with a master disconnect switch and gauge type battery discharge indicator.  (A polarized heavy gauge extension cord rated 12-3 15amp / 125 volt with grounded type B (NEMA 5-15) plug is required).
  • RCR 1626-8 clamp rotates 360 degrees left or right, designed for handling a 16” (40.6 cm) to 26” (66 cm) diameter drum with 8” (20.3cm) high fixed clamping pads lined with white non-marking rubber to securely grip the drum. 
  • Lift/lower, clamp/unclamp and rotate left/right function located in the top of DC cabinet
  • Clamp/unclamp with red dead-man switch to prevent accidental dropping of drum
  • Darcor® ergonomic non-marking casters 5” x 2”: (2) swivel, (2) rigid
  • Ergonomic step-down foot floor lock 
  • Finish: Safety orange powder coating
  • Base Dimensions: 39.2″ (99.6cm) length x 29.5″ (74.9cm) in overall width
  • 1-year warranty
  • Made in USA

Small Drum Adaptor which reduces the clamping range diameter by 5” (13 cm). Each small drum adapter consists of one individual curved section with white non-marking rubber vulcanized to the metal curve. The adapter is then slid through or around the clamp back pad and locked into place by inserting two stainless-steel retaining pins & circle cotter pins on a lanyard.

 

01-RCR1626-8-with-SDA

Adjustable Clamping Pressure with Pressure Gauge – When handling light fiber or a sensitive drum subject to impressions it may be necessary to lower the hydraulic pressure of the clamping mechanism. Reducing the hydraulic clamping pressure will reduce the force of the clamping mechanism against the drum being gripped.

 

01-Adjustable-Clamping-Pressure-249x300.jpg-1

Anti-Drift Motor Brake for suspending an unbalanced load in a rotated position for an extended period of time

 

03-Anti-Drift-Motor-Brake-1

Counterbalanced base frame in lieu of Straddle leg base frame

 

04-ELDR-with-CB-Frame-and-RCR1626-8

“FDA” Compliant Metallic Gray Powder Coating with coated lift chains, food grade grease & hydraulic fluid

 

01-DC-Powered-ELDR-with-RCR1626-8-1

Fabricate base frame and mast in 304 Stainless-Steel Construction* (includes food grade grease & hydraulic fluid, stainless cylinder, excludes lift chain & select components). *Stainless-Steel construction is stitch welded, not continuous, and finished by glass bead blasting to provide a #4 brush finish with a gray matte uniform surface. Stainless-Steel units are not wash down safe. Stainless-Steel Construction is not available for trial, return, exchange, or cancellation.

 

02-NO-PHOTO-IMAGE-COMING-SOON-225x300-1

Non-Intrinsically Safe Scale System: Rice Lake 680 Indicator for dispensing by weight or performing inventory. Includes swivel scale bracket, all wiring, two stainless steel load cells, hardwired to drum dumper battery, mounting and calibration.

01-Rice-Lake-680-Indicator-1

DC Cabinet with exchangeable batteries for long run application (includes quick disconnects, two sets of 12-volt AGM batteries and external charger in lieu of internal charger) requires DC powered lift option

01-Exch.-Battery-Option-in-DC-Cabinet-2

DC Cabinet with exchangeable batteries & charging stand for long run applications (includes quick disconnects, two sets of 12-volt AGM batteries, and a wall mounted charging stand with an external charger in lieu of internal charger) requires DC powered lift option

07-Exch.-Battery-DC-Box-and-Shelf

Additional set of exchangeable 12-volt AGM batteries with quick disconnects requires DC powered lift & DC Cabinet with exchangeable batteries option

04-Set-of-Exchangeable-Batteries-2

tab-slider-left-logo-image

Explore Similar Products

Contact Us

Contact Us for a Free Price Quote

We invite you to contact us to learn more about our drum material handling equipment and to receive a no-obligation price quite. Make Easy Lift Equipment your one-stop source for all your drum handling needs!

Learn more about our drum handling equipment, or contact us to place an order. 

Contact Us Call Us: 302-737-7000
cta-1