flexible-hero-image
01-–-Drum-Hauler-with-FSR-Clamp-and-plastic-drum-raised-in-pour-position-min
02-Closeup-of-FSR-Clamp-on-DH-with-plastic-drum-min
03-–-DH-with-FSR-Clamp-without-drum-min
01-–-Drum-Hauler-with-FSR-Clamp-and-plastic-drum-raised-in-pour-position-min
02-Closeup-of-FSR-Clamp-on-DH-with-plastic-drum-min
03-–-DH-with-FSR-Clamp-without-drum-min
EE-symbol CE-symbol
EE-symbol CE-symbol

Drum-Haulers®

for Lift, Travel, Clamp & Forward Rotation

Drum-Haulers® with FSR (Forward Strap Rotator) are the most ergonomic equipment available for transporting, weighing, and dispensing products from a plastic, fiber, or steel drum. Drum-Haulers are designed to work in tightly confined production areas and are completely counterbalanced, requiring no outriggers for stability, and are ideal for traveling over long distances. The large industrial battery provides enough power to run continuously for up to 16 hours on a single charge. Drum-Haulers with lift & FSR forward clamp rotators feature two ratchet straps for handling a steel, plastic, or fiber drums from 12” (30.5 cm) to 24” (61 cm) in diameter, and can rotate 180° forward for dispensing.

  • Standard capacity is 800 lbs. (362.9 kg) but, can be built to handle up to 1,000 lbs. (450 kg) based on equipment configuration. 
  • Available with either a single- or two-stage mast for lift heights from 48″ to 144″ (122 cm to 366 cm) of vertical lift.
Request A Quote
Drum-Hauler®-Operations-Easy-Lift-Equipment-0-7-screenshot-min-2

Drum-Hauler® Operations – Easy Lift Equipment

video-union
Specifications
Additional Options
Videos
  • Powered Drum Transporter with Powered: travel, lift & rotation
  • Capacity: 800 lbs. (360kg)
  • Single- or two-stage mast for lift heights from 48″ to 144″ (122 cm to 366 cm) of lift from floor to bottom of a 34.5” (87.6cm) tall drum in the vertical position
  • FSR clamp with two ratchet straps for handling a steel, plastic, or fiber drum from 12” (30.5 cm) to 24” (61 cm) in diameter, and rotates 180° forward for dispensing 
  • Provides approximately 16” (406cm) of reach from the front of the base to the lip of the drum when in a 135° pour position
  • Remote rotation functions provided in magnetic backed control box on coil cord
  • Battery: Deka 12-D85-9 Wet Cell, 24 Volt, 340 A.H. industrial battery with Anderson 175SB connector
  • Key on/off switch & Battery Discharger Indicator with gauge type with hour-meter
  • Electronic speed controller is equipped with three travel profiles to allow for factory customization of travel parameters.  Maximum travel speed can be preset for speeds between 0.93 and 2.8 mph. Unless otherwise specified at time of order, maximum travel speed will be factory preset at 1.8 mph in the forward and reverse direction.
  • Thumb control forward and reverse switch with creep speed provided by a snail button, reversing safety switch with handle lockout positions and horn button located in the tiller handle
  • Load Wheels: (2) tandem polyurethane 3” dia. x 4” wide  
  • Drive Wheel: (1) polyurethane or rubber 9” diameter x 2.75” wide 
  • PVC Foot Guard on rear of Drum-Hauler behind drive tire
  • Stability Caster: (2) polyurethane 4” diameter x 1” wide
  • Finish: Safety orange powder coating
  • Base Dimensions: 54” (137.2cm) length x 28.5” (72 cm) width, 45” (114.3cm) width at clamp
  • 1-year warranty, 2-year warranty on drive motor, 5-year warranty on wet cell batteries
  • Made in USA

Increase weight capacity over 800 lbs. (360kg) based on equipment configuration

01-DH-with-FSR-and-Reinforced-Mast-for-increased-capacity-min

Battery Roll out tray with conveyor and Stand for 3-shift operations.  The battery stand is designed to hold one additional battery and provide the ability to quickly change a low powered battery with a fully charged one. This prevents downtime and increases productivity. An extension cable is also provided with the battery stand to assist in the battery changing process.

04-Battery-Stand-and-Battery-Roll-out-Tray-on-DH-min-1

“FDA” Compliant Metallic Gray Powder Coating with coated lift & rotation chains, food grade grease & hydraulic fluid, and Stainless-Steel hardware

01-DH-with-FSR-and-Reinforced-Mast-for-increased-capacity-min

304 Stainless-Steel Construction* (includes food grade grease & hydraulic fluid, stainless cylinder, excludes lift chain & select components).

02-DH-with-FSR-with-Stainless-Steel-Construction-min

Non-Intrinsically Safe Scale System: Rice Lake 680 or Doran 7000XLM Indicators

01-DH-with-Non-Intrinsically-Safe-Scale-min-1

Intrinsically Safe Scale System: Rice Lake 882IS or Mettler-Toledo 256x Indicators FM approved for Class I, II, III, Div.1 Groups A,B,C,D,E,F,G/T4

02-DH-with-Intrinsically-Safe-Scale-min

Intertek approved “EE” rating

01-DH-with-EE-Rating-Closeup-min

X-Groove siped polyurethane drive wheel

01-X-Groove-siped-polyurethane-drive-wheel-1

Enclosed drive controller to provide improved protection from water damage 

02-Enclosed-Drive-Controller-1
  • Deka 12-D85-7 IST3603, 24 volt, 225 A.H. Industrial Wet Cell Battery with Chargemate on-board Charger in lieu of Deka 12-D85-9 Wet Cell battery (requires extended lead time)
  • Deka 12-G75-9, 24 volt, 300 A.H. Industrial Gel Cell Battery in lieu of Deka 12-D85-9 Wet Cell battery (requires extended lead time)
  • EnerSys 24-12NXS-137-2 24v, 274 A.H. NexSys Pure TPPL Maintenance Free Ind. Battery w/ on-board Charger in lieu of Deka 12-D85-9 Wet Cell battery (requires extended lead time)
01-12-D85-7-Wet-Cell-with-Chargemate-min

Uncrating your equipment – Drum-Hauler® & Roll-Hauler – Easy Lift Equipment

tab-slider-left-logo-image

Explore Similar Products

Contact Us

Contact Us for a Free Price Quote

We invite you to contact us to learn more about our drum material handling equipment and to receive a no-obligation price quite. Make Easy Lift Equipment your one-stop source for all your drum handling needs!

Learn more about our drum handling equipment, or contact us to place an order. 

Contact Us Call Us: 302-737-7000
cta-1